STEP 6 Printed parts - versioning
Most of the 3D printed parts are
marked with their version.
E, F and Gx series (e.g. E1) -
those parts are printed on Prusa
Research farm and are
distributed with the kit.
R, S and Tx series (e.g. R1) -
those parts are available for
download at prusa.io/printable-
parts-mk4s. They are identical
to the factory ones.
In case you have issues while
assembling the printer with the
certain printed part, please try to
find this label and tell it to our
support team.
STEP 7 We are here for you!
Lost in the instructions, missing screw or cracked printed part? Let us know!
You can contact us using the following channels:
Using comments under each step.
Using our 24/7 live chat here at help.prusa3d.com
Writing an email to info@prusa3d.com
To Next Page
Loading...
