IG-273-EN version 03; 05/08/2020
26
Installation General instructions
cpg.0 ENA range
6.6.2. cpg.0-c
The xing points for bus section circuit breaker cubicles are
dened in Figure 6.13 and Figure 6.14:
Ensure:
- The front faces of the units are ush and in alignment.
- The top edge of the bolting ange in the busbar
chamber must be aligned and level with the adjacent
unit.
- There should be no gaps between the bolted faces.
Figure 6.13. Fixing points up to 1250 A Figure 6.14. Fixing points up to 2000/2500 A
To Next Page
Loading...
