Installation
2.1 SAFETY
Safety: Symbols Used
Table 2-1:
Safety symbols used in this document, or on the product
Symbol Signal word Definition
DANGER!
Potentially dangerous situation which may lead to per-
sonal injury or death! Follow the instructions closely.
CAUTION!
Caution, risk of electric shock.
CAUTION!
Potential equipment damage or destruction!
Follow the instructions closely.
NOTE
Tips and other useful or important information.
MULTIPLE
POWER SOURCES
This equipment may contain more than one power
source: Disconnect AC
and
DCpower supply cords
before removing the cover to avoid electric shock.
ESD
Risk of Electrostatic Discharge! Avoid potential equipment
damage by following ESD Best Practices.
CHASSIS GROUND
This symbol is used for identifying the functional ground
of an I/O signal. It is always connected to the instrument
chassis.
Analog Ground
Shows where the protective ground terminal is con-
nected inside the instrument. Never remove or loosen
this screw!
Recycle
Recycle the mentioned components at their end of life.
Follow local laws.
SAFETY: Before You Begin Installation
2.1 SAFETY
SecureSync Getting Started Guide Rev. 12.0 15
To Next Page
Loading...
Need help?
General
