Always follow the instructions set out in this Getting Started Guide, or in other Orolia
documentation for this product.
Observe generally applicable legal and other local mandatory regulations.
2.2 Unpacking and Inventory
Caution: Electronic equipment is sensitive to Electrostatic Discharge
(ESD). Observe all ESD precautions and safeguards when handling the unit.
Unpack the equipment and inspect it for damage.
Note: Retain all original packaging for use in return shipments if necessary.
The following items are included with your shipment:
SecureSync unit
QuickStart Guide (printed version)
Ancillary items (except for rack mounting items, the contents of this kit may vary
based on equipment configuration and/or regional requirements)
Purchased optional equipment; note that option cards listed on the purchase order
will be pre-installed in the unit.
2.3 Required Tools and Parts
Depending on your application and system configuration, the following tools and parts may
be required:
Phillips screwdrivers to install the rack-mount ears, and to mount the unit in a 19"-
rack
If you plan on using DC power Orolia recommends an external ON/OFF switch.
Ethernet cables.
2.3.1 Required GNSS Antenna Components
Should you plan on using a GNSS reference with your SecureSync, you will also need:
18
SecureSync Getting Started Guide Rev. 12.0
2.2 Unpacking and Inventory
To Next Page
Loading...
Need help?
General
