DANGER! — GROUNDING: This equipment must be EARTHGROUNDED.
Never defeat the ground connector or operate the equipment in the
absence of a suitably installed earth ground connection. Contact the appro-
priate electrical inspection authority or an electrician if you are uncertain
that suitable grounding is available.
The AC and DC power connectors of this equipment have a connection to
the earthed conductor of the AC and DC supply earthing conductor
through the AC and DC power cords. The AC source outlet must contain a
protective earthing connection. This equipment shall be connected directly
to the AC power outlet earthing pin or DC supply system earthing elec-
trode conductor.
The DC supply source is to be located within the same premises as this
equipment: The equipment shall be located in the same immediate area
(such as, adjacent cabinets) as any other equipment that has a connection
to the earthing conductor of the same AC or DC supply circuit earthing con-
ductor, and also the point of earthing of the AC or DC system.The AC or
DC system shall not be earthed elsewhere.
Switches or other disconnection devices shall not be in the earthed circuit
conductor between the AC and DC source and the point of the connection
of the earthing electrode conductor to SecureSync’s AC and DC input
power connectors earthing pin.
Caution: Electronic equipment is sensitive to Electrostatic Discharge
(ESD). Observe all ESD precautions and safeguards when handling Orolia
equipment.
SAFETY: User Responsibilities
The equipment must only be used in technically perfect condition. Check com-
ponents for damage prior to installation. Also check for loose or scorched cables on
other nearby equipment.
Make sure you possess the professional skills, and have received the training neces-
sary for the type of work you are about to perform.
Do not modify the equipment.
Use only spare parts authorized by Orolia.
2.1 SAFETY
SecureSync Getting Started Guide Rev. 12.0 17
To Next Page
Loading...
Need help?
General
