OTARI MX-55T-M - Page 20

Introduction
MX-55 Operation and Maintenance Manual
Section 6 lists the SPECIFICATIONS of the MX-55T-M, MX-55T and
MX-55N -M tape recorders.
Section 7, EXPLODED VIEWS AND PARTS USTS, contains assembly
drawings of the machine "exploded" to show internal parts and
hardware, and the order of assembly. Each drawing is keyed to an
accompanying Parts List containing the Otari part number for each
mechanica 'l component.
Section 8, PRINTED CIRCUIT BOARD LAYOUTS AND PARTS USTS,
contains two-color "X-ray" views of the printed circuit boards
(PCBs) showirilg component locations and foil traces. This section
also contains Parts Lists of the e' lectronic components associated
with each PC'S.
The final section contains the SCHEMATIC DIAGRAMS for all elec-
tronics assemblies and pr i rlted circuit boards.
1.2.2 Conventions within this manual
Generally this manual uses all capital letters to describe a control,
indicator, or connector when that item is similarly labeled on the
mach.ine (e.g., INPUT level control or PARALLEL lID connector).
Where a control or indicator is not labeled on the machine, the
name of that item , is spelled with initial cap ' italletters only (e.g., Mic
Input connector or Cue Spea ' ker). The six major transport control
buttons are not labeled on the machine, but are labeled on the but-
ton caps with graphic symbols. Th l is manual uses the name of the
button rather than the graphic symbol whenever the buttons are ref-
erenced.
BuHonSynoi
Name
PLAY
RECORD
STOP
FAST FORWARD (F. FWD)
REWIND
CUE
1 ·4
November 1989