otometrics ICS Impulse USB - Server, Client, and Combined Installation Procedures; Completing the Software Installation

Server/Both installation
Before starting the installation, determine the type of installation required:
• Server only - OTOsuiteVestibular database and a limited version of OTOsuiteVestibular software for archiving/backing
up data will be installed.
Important• When installing a server/client installation the server must be installed first.
• Both (Server and Client)
1. Select Server or Both and click Next.
Note• Although it is possible to change the port number (used by the SQL server), we recommended you use the one
supplied on the screen.
2. Make note of the entries for Port Number and Server Computer Name as this information will be required for all cli-
ent computers. (For computers connected to a printer, you can click Print to print out the information.)
3. If Both was selected, click Next and continue at Complete the installation ► 114.
4. If Server was selected, click Next and continue at Complete the installation ► 114.
Client installation
1. Select Client and click Next.
2. Enter the port number and the server computer name obtained from the server installation.
3. Click Next and continue at Complete the installation ► 114.
Complete the installation
1. Click Install. A status window appears reporting the progress of the installation.
2. Click Finish.
3. Open the Control Panel.
Windows 7 Windows 8
A. Press the Windows key.
B. Start typing control panel until the option Control
Panel appears.
C. With Control Panel selected, press Enter.
A. Press the Windows key + X.
B. Select Control Panel from the list of options and press
Enter.
Note• The Windows key is located next to the Alt key. It can be identified by the Windows logo on the key. In
case the keyboard lacks this key, pressing Ctrl+Esc performs the same function.
114 Otometrics - ICS Impulse USB
14 Installation and Setup