56/164 cod. 00 477 1480 - 12/2012 - Palazzetti - PN - Italy
USE AND MAINTENANCE
8 PRELIMINARY
OPERATIONS
8.1 LOADING THE PELLETS
The pellets are loaded into in the hopper using a
scoop.
Do not empty the sack directly into the hopper so
as to avoid loading sawdust or other foreign bodies
that may affect proper stove operation and avoid
spilling pellets outside of the hopper.
Make sure the hopper lid is well closed again after
having loaded the pellets.
8.2 POWER SUPPLY
is closed.
If provided, move the switch at the rear of the stove
to position (I).
If the connections are correct the stove will emit a
series of intermittent beeps, the display will come
on and the message “PALAZZETTI ECOFIRE” will
be shown. After 2 seconds the display will show
“OFF” and the second row will show the operating
parameters: POWER, AIR FAN, SET ROOM T..
If not using the appliance for an extended period, the
switch at the rear of the stove, if provided, should
be moved to position (O).
8.3 INITIAL SETTINGS
The language, current date and time need to be set
before using the stove.
8.3.1 language setting
Go to the “STOVE SETTINGS MENU” following the
“Procedure for accessing the menus” described in
paragraph 7.3 and press OK.
1) Scroll the submenus using the or button
2) Use the
button to select the “LANGUAGE”
menu
3) Select the desired language using the
or
button
(“ok”)
5) Press
OFF
(“x”) to exit the submenu (press the
same button again if necessary to go back
another menu level).
8.3.2 Time setting
Go to the “STOVE SETTINGS MENU” following the
“Procedure for accessing the menus” described in
paragraph 7.3 and press OK.
4) Scroll the submenus using the or button
5) Use the
button to select the “TIME” menu
6) Select the current day using the
or
(“ok”)
7) Select the current hours using the
or
(“ok”)
8) Select the minutes hours using the
or
(“ok”)
9) Press
OFF
(“x”) to exit the submenu (press the
same button again if necessary to go back
another menu level).
8.3.3 Date setting
Go to the “STOVE SETTINGS MENU” following the
“Procedure for accessing the menus” described in
paragraph 7.3 and press OK.
4) Scroll the submenus using the or button
5) Use the
button to select the “DATE” menu
6) Select the current day, month and year desired
using the
or
selection by pressing (“ok”)
7) Press
OFF
(“x”) to exit the submenu (press the
same button again if necessary to go back
another menu level).
To Next Page
Loading...
