Palfinger Clocktower PK2400 TK - Page 74

Ancillary equipment
68
 The safety latch of the hook must close by means of spring pressure after the load has been
attached.
 Lock the bolts for the lower load block with pin retention (lynch pin). Use only original bolts for the
lower load block!
 Have any damaged safety latch or lynch pin immediately replaced by a PALFINGER partner.
Warning!
When attaching and detaching loads, be aware of increased risk of
crushing.
Keep the required minimum distances to all crushing points (refer 'Danger of getting crushed' in
chapter 2).