Preparing for crane operation
Daily function check of safety equipment
Carry out the function check without load and with all extension booms retracted.
Emergency cut-off function check
Danger! If the crane doesn’t stop after pressing the emergency cut-
off button or if other crane movements are still possible there is acute
danger to life.
Working with a defective emergency cut-off button is grossly negligent. Do not operate the crane and
contact a PALFINGER service partner.
Operate any crane function. The crane must move perfectly in all directions.
Press the emergency cut-off button while the crane is moving. The crane must come to a stop.
Again, operate any crane function.
The crane must not move.
Release the emergency cut-off button; The crane should move perfectly in all directions.
Refer also to chapter 5, 'Emergency cut-off button'.
To Next Page
Loading...