Chapter 8 Crane operation
Loads
Material basket
Before loading/unloading
Before lifting any loads check if the load lifting gear (1) is used correctly.
Observe special instructions about load handling and/or lifting gear (e.g. lifting points, center of
gravity, orientation, etc.)
Secure the load using the material retaining bars (2).
Make sure the load is free to move and not anchored or otherwise attached to the ground.
Before lifting loads, clean them of any sand and clear loose object. Wet or loose objects may slip.
Lift the load only above its center of gravity.
The rollers (3) serve only to protect the building.
To Next Page
Loading...