Section 1A: Setting Up Software 7
Setting Up Software
Check the indicator light to make sure your Treo 650 is charging. If the battery is
fully drained, it may take a few moments for the indicator light to turn on while
charging. When your Treo 650 is connected to a power source, the indicator light
glows solid (versus flashing), and the color of the light indicates the following:
䢇 Red indicator light: battery is charging.
䢇 Green indicator light: battery is fully charged.
䢇 Indicator light off: battery is not charging. Check the cable connection and the
outlet to which it is connected.
After you set up your Treo, the onscreen battery icon displays power status:
䢇 Full battery icon : battery is charged.
䢇 Partial battery icon : battery has some power but is not fully charged.
䢇 Empty battery icon : battery needs charging immediately.
䢇 Red lightning bolt : battery is charging.
䢇 Green lightning bolt : battery is fully charged.
Using a Sprint Charger Adapter
If the connector on your Sprint-approved 1 Amp AC charger or vehicle charger
doesn’t fit into the connector on the bottom of your Treo device, use the included
Sprint charger adapter.
Important:
It is vital that you use only Sprint-approved AC adapter chargers, car
chargers, and replacement batteries. Use of unauthorized accessories
could damage your device and invalidate your warranty.
To Next Page
Loading...
