Section 4A: Help 261
Help
Replacing the Battery
Your Treo 650 comes with a replaceable battery. Be sure to use a Sprint-approved
battery that is compatible with Treo 650.
1. Press Power/End to turn off the screen.
2. Press the Battery Door Release button and slide the battery door downward
to remove it from your Treo 650.
3. Place a finger in the notch between the stylus and the battery and lift the
battery up at a 45 degree angle.
4. Align the metal contacts on the battery with the contacts inside the battery
compartment.
5. Insert the battery into the compartment at a 45-degree angle and then
press it into place.
6. Slide the battery door onto the back of the device until it clicks into place.
To Next Page
Loading...
