Chapter 1 Page 3
Setting up your handheld
1. Press the power button to turn on your handheld.
2. Follow the instructions on the screen to set up your handheld.
Note:
If your handheld does not turn on, see Chapter 4 in this
guide for suggestions.
Important:
For users outside the United States, choose the same
language for your handheld and Palm Desktop software.
Choosing a language that does not match the Palm
Desktop software is not recommended or supported, and
may result in data loss. If you need to reselect a language
on your handheld, you must perform a hard reset. See
“Resetting your handheld” in Chapter 3 for details.
3. After you enter the time and date, tap Next to complete the Basic
Skills tutorial.
Tip:
To access the Basic Skills tutorial later, tap the Welcome
icon in the Applications launcher.
Using the protective flip cover
You can open the cover so that it rests on the back of your handheld,
or remove it altogether.
Removing the cover
1. Open the cover and grasp the hinge with your thumb.
2. Gently rock the cover from one side to the other until the hinge
prongs release from the slots on the top edge of your handheld.
To Next Page
Loading...
Need help?
General
