Panasonic AJ-PX380G - [SCENE FILE]

– 130 –
Chapter 6 Menu Operations — Menu list
Menu list
[SCENE FILE]
Congure the settings regarding scene les.
This menu is used to set ne image quality settings of the camera images, select scene les, and read/write scene le data to the internal memory.
These menu items cannot be set when the thumbnail screen is displayed.
Item Description of settings
[NAME EDIT] Edits the name of the scene le selected in the scene le menu. (Maximum of six characters)
[LOAD/SAVE/INITIALIZE] Loads/saves/initializes the setting values allocated on the current scene le number (any one from 1 to 6).
[LOAD]: Selects and loads a scene le saved in the camera memory.
[SAVE]: Species a title and le number for the current setting values and saves them as a scene le in
the camera memory.
[INITIALIZE]: Initializes the selected scene les (1 to 6) to the factory settings.
[SYNC SCAN TYPE] Switches the synchro scan display settings.
[sec]: Displays in time.
[deg]: Displays at shutter open angle.
f Factory setting: [sec]
[SYNCHRO SCAN] Displays the speed of the synchro scan shutter that is used when shooting video for television etc.
When [SYNC SCAN TYPE] = [sec], and [SYSTEM MODE] = 59.94 Hz:
f 60i/60p: [1/60.0]…[1/249.8]
f 30P: [1/30.0]…[1/249.8]
f 24P: [1/24.0]…[1/249.8]
When [SYNC SCAN TYPE] = [sec], and [SYSTEM MODE] = 50 Hz:
f 50i/50P: [1/50.0]…[1/250.0]
f 25P: [1/25.0]…[1/250.0]
When [SYNC SCAN TYPE] = [deg] (in 0.5 d steps, angle display): [3.0d]…[360.0d]
f Factory setting: [1/60.0] (when [SYNC SCAN TYPE] = [sec], and [SYSTEM MODE] = 59.94 Hz)
[MASTER DTL] Sets the level of the detail effect of the whole part.
[−31]…[31]
f Factory setting: [0]
[DTL CORING] Sets the level of signal (including noise) that does not activate the detail effect.
[0]…[60]
f Factory setting: [1]
[DETAIL SETTING] [DETAIL] Sets [ON]/[OFF] of the detail function.
[ON], [OFF]
f Factory setting: [ON]
[V.DTL LEVEL] Sets the intensity of the detail level in the vertical direction.
[−7]…[7]
f Factory setting: [0]
[H.DTL FREQ.] Sets the thickness of the detail level in the horizontal direction.
[−7]…[7]
f Factory setting: [0]
[V. DTL FREQ.] Sets the thickness of the detail level in the vertical direction.
[0]…[2]
f Factory setting: [1]
[LEVEL DEPEND.] When the detail of luminosity signal is emphasized, details in the darker parts are compressed.
Details of bright areas are also compressed more when the value set for [LEVEL DEPEND.] is larger.
[−7]…[7]
f Factory setting: [0]
[KNEE APE LVL] Sets the detail level of high luminosity areas (high-brightness areas). For operation, 0 is displayed as
[OFF].
[OFF], [1]…[5]
f Factory setting: [2]
[DTL GAIN(+)] Sets the detail level of + direction (to make brighter).
[−31]…[31]
f Factory setting: [0]
[DTL GAIN(−)] Sets the detail level of − direction (to make darker).
[−31]…[31]
f Factory setting: [0]
[SKIN TONE DTL A] Selects the skin tone table that will display the skin tone detail.
Create the skin tone table with [DETECT TABLE]. You can shoot smoother skin tones by displaying the
skin tone detail. [SKIN TONE DTL A] can be used alone or used in combination with [SKIN TONE DTL B]
and [SKIN TONE DTL C].
[ON], [OFF]
f Factory setting: [OFF]
[SKIN TONE DTL B] Selects the skin tone table that will display the skin tone detail.
Create the skin tone table with [DETECT TABLE]. You can shoot smoother skin tones by displaying the
skin tone detail. [SKIN TONE DTL B] can be used alone or used in combination with [SKIN TONE DTL A]
and [SKIN TONE DTL C].
[ON], [OFF]
f Factory setting: [OFF]