Panasonic AJ-PX380G - [AUDIO SETUP]

– 142 –
Chapter 6 Menu Operations — Menu list
[AUDIO SETUP]
Congure the settings regarding audio input/output.
Item Description of settings
[INPUT SETTING] [FRONT MIC POWER] Selects the phantom power of the front microphone.
[ON], [OFF]
f Factory setting: [ON]
[FRONT MIC LVL] Sets the level of an external microphone connected to the <MIC IN> terminal. Enabled only when a
microphone is connected.
[−40dB], [−50dB], [−60dB]
f Factory setting: [−50dB]
[REAR MIC CH1 LVL] Sets the level of an external microphone connected to the <AUDIO IN CH1/3> terminal. Enabled only
when a microphone is connected.
[−50dB], [−60dB]
f Factory setting: [−60dB]
[REAR MIC CH2 LVL] Sets the level of an external microphone connected to the <AUDIO IN CH2/4> terminal. Enabled only
when a microphone is connected.
[−50dB], [−60dB]
f Factory setting: [−60dB]
[WIRELESS WARN] Selects whether to display a warning when the reception status of the wireless microphone receiver is
poor.
[ON], [OFF]
f Factory setting: [OFF]
[WIRELESS TYPE] Selects the type of wireless microphone receiver.
[SINGLE]: Selects a single channel type wireless microphone receiver.
[DUAL]: Selects a double channel type wireless microphone receiver.
f Factory setting: [SINGLE]
[RECORDING CH
SETTING]
[FRONT VR CH1] Selects whether to enable the <F.AUDIO LEVEL> dial for input signals selected for audio channel 1.
[FRONT]: Enabled only when [FRONT] is selected.
[W.L.]: Enabled only when wireless microphone receiver is selected.
[REAR]: Enabled only when [REAR] is selected.
[ALL]: Enabled when any input is selected.
[OFF]: Disabled regardless of the input selected. Recording levels do not change even if the volume dial
is turned.
f Factory setting: [OFF]
[FRONT VR CH2] Selects whether to enable the <F.AUDIO LEVEL> dial for input signals selected for audio channel 2.
[FRONT]: Enabled only when [FRONT] is selected.
[W.L.]: Enabled only when wireless microphone receiver is selected.
[REAR]: Enabled only when [REAR] is selected.
[ALL]: Enabled when any input is selected.
[OFF]: Disabled regardless of the input selected. Recording levels do not change even if the volume dial
is turned.
f Factory setting: [OFF]
[FRONT VR CH3] Selects whether to enable the <F.AUDIO LEVEL> dial for input signals selected for audio channel 3.
[FRONT]: Enabled only when [FRONT] is selected.
[W.L.]: Enabled only when wireless microphone receiver is selected.
[REAR]: Enabled only when [REAR] is selected.
[ALL]: Enabled when any input is selected.
[OFF]: Disabled regardless of the input selected. Recording levels do not change even if the volume dial
is turned.
f Factory setting: [OFF]
[FRONT VR CH4] Selects whether to enable the <F.AUDIO LEVEL> dial for input signals selected for audio channel 4.
[FRONT]: Enabled only when [FRONT] is selected.
[W.L.]: Enabled only when wireless microphone receiver is selected.
[REAR]: Enabled only when [REAR] is selected.
[ALL]: Enabled when any input is selected.
[OFF]: Disabled regardless of the input selected. Recording levels do not change even if the volume dial
is turned.
f Factory setting: [OFF]
[MIC LOWCUT CH1] Enables/disables the lowcut lter for audio channel 1.
[ON], [OFF]
f Factory setting: [OFF]
[MIC LOWCUT CH2] Enables/disables the lowcut lter for audio channel 2.
[ON], [OFF]
f Factory setting: [OFF]
[MIC LOWCUT CH3] Enables/disables the lowcut lter for audio channel 3.
[ON], [OFF]
f Factory setting: [OFF]
[MIC LOWCUT CH4] Enables/disables the lowcut lter for audio channel 4.
[ON], [OFF]
f Factory setting: [OFF]
[LIMITER CH1] Enables/disables the limiter for audio channel 1.
[ON], [OFF]
f Factory setting: [OFF]
[LIMITER CH2] Enables/disables the limiter for audio channel 2.
[ON], [OFF]
f Factory setting: [OFF]