– 51 –
Chapter 3 Preparation — Tally lamp
Tally lamp
The tally lamp will ash when the camera is in the following status.
f When there is no remaining battery (once per second)
f The P2 card has less free space to record and the battery level is low (one time per second)
f The P2 card has been removed while being accessed (four times per second)
f The P2 card has no more space to record (four times per second)
f When warnings such as a system error or recording abnormality are displayed (four times per second)
For details, refer to “Warning system” (page 212).
Rear tally lamp
Back tally lamp
To Next Page
Loading...
