– 152 –
Chapter 6 Menu Operations — Menu list
Item Description of settings
[MIC] Sets the microphone level when INCOM is used connected directly with AG-BS300P/AG-BS300E.
This can be set when the main menu → [OTHER FUNCTIONS] → [INCOM] is set to [ON].
[−6dB], [−3dB], [0dB], [3dB], [6dB]
f Factory setting: [0dB]
[MENU INITIALIZE] Restores the whole setting menu including all scene les (1 to 6) and user les to the factory settings.
This cannot be executed in the following cases.
f While displaying the thumbnails
f During playback
f When the main menu → [NETWORK SETUP] → [FTP CLIENT SERVICE] → [REC DURING UPLOAD]
is set to [ENABLE], and there is a clip to be uploaded
[MAINTENANCE]
These are items for performing maintenance inspection of the camera. This menu is used for updating the rmware version of the camera.
Item Description of settings
[UPDATE] Performs an update of the camera rmware. (Enabled only when there is a dedicated update le on the SD
memory card.)
[LENS ADJ.] [F2.8 ADJ.] Only when this item is set to [ON], sets the iris to F2.8. (Adjusts so that it becomes F2.8 at the lens.)
[ON], [OFF]
f Factory setting: [OFF]
[F16 ADJ.] Only when this item is set to [ON], sets the iris to F16. (Adjusts so that it becomes F16 at the lens.)
[ON], [OFF]
f Factory setting: [OFF]
[WHITE SHADING] [SHADING SELECT] Sets the white shading data.
[L1:LENS1], [L2:LENS2], [L3:LENS3], [OFF]
f Factory setting: [OFF]
[NAME EDIT] Edits the title of the white shading data. (Up to six characters)
[EXECUTE] Sets the white shading compensation parameter for the data selected in [SHADING SELECT]. (This
cannot be set if [OFF] is selected).
[CAC ADJ.] [CAC CONTROL] Enables/disables the chromatic aberration compensation function (CAC).
[ON]: Compensates for chromatic aberration.
[OFF]: Does not compensate for chromatic aberration.
f Factory setting: [ON]
[LIST/DELETE] Performs such operations as viewing the list of CAC stored in the camera internal memory and deleting
les of the numbers selected from the list of CAC.
[No1]…[No32]
f Factory setting: [No1]
[DIAGNOSTIC]
This menu is used to display the rmware version, product name, serial number, and operation time of the camera.
Item Description of settings
[VERSION] Displays the information of the camera.
[VERSION]: Displays the version (representative version) of all rmware in the camera.
[MODEL NAME]: Displays the product name of the camera.
[SERIAL NO.]: Displays the serial number of the camera.
[NETWORK ID]: Displays the network ID of the camera.
[UID]: Displays the unique ID of the camera.
Turn the jog dial button (or press the cursor button) to display the list of each rmware version.
[OPERATION] Displays the operation time of the camera.
[USER MENU SEL]
Congure the items to be displayed in [USER MENU].
To Next Page
Loading...
