Panasonic AK-HRP1005G

38 CONNECT SETTING
ヒチバチヒヘ
ヤヰワワユヤヵチヴユヵヵリワヨ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ヤモヮビ
ヤモヮブ
ヤモヮピ
ヤモヮプ
ヤモヮヒ
ヤモヮフ
ヴㄆㄓㄊ㄂ㄍワヰワワヰワ
ワヰワワヰワワヰワ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ビチバチヒヘ
ヤヰワワユヤヵチヴユヵヵリワヨ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ヤモヮベ
ヤモヮヒヒ
ヤモヮペ
ヤモヮヒビ
ヤモヮヘ
ヤモヮヒパ
ワヰワワヰワワヰワ
ワヰワワヰワワヰワ
ヒヘチバチヒヘ
ヤヰワワユヤヵチヴユヵヵリワヨ
ヤモヮペベヤモヮペペヤモヮペヘ
ワヰワワヰワワヰワ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
___ indicates factory default settings.
Item Setting value Setting details
CONNECT MODE CAM1 NON
Serial
LAN
Serial(AK)
LAN(AK)
Serial(AW)
LAN(AW)
Sets the connection method for camera 1.
After configuring the settings, press the menu operation dial to apply the set-
tings.
Serial, LAN: Select when connecting with the AK-HC5000 series, AK-UC3000
series, or AK-UC4000 series.
Serial(AK), LAN(AK): Select these when connecting the AK-HC3500A series
and AK-HC3800 series.
Serial(AW), LAN(AW): Select these when connecting the AK-UB300 series.
“Serial”, “Serial(AK)”, and “Serial(AW)” cannot be set for multiple cameras.
CONNECT MODE CAM2 to
CAM99
NON
Serial
LAN
Serial(AK)
LAN(AK)
Serial(AW)
LAN(AW)
Sets the connection method for cameras 2 to 99.
After configuring the settings, press the menu operation dial to apply the set-
tings.
Serial, LAN: Select when connecting with the AK-HC5000 series, AK-UC3000
series, or AK-UC4000 series.
Serial(AK), LAN(AK): Select these when connecting the AK-HC3500A series
and AK-HC3800 series.
Serial(AW), LAN(AW): Select these when connecting the AK-UB300 series.
“Serial”, “Serial(AK)”, and “Serial(AW)” cannot be set for multiple cameras.
NOTE
An AK-UB300 with a system version of 07.0A-000-00.00 or later can be connected.
- 114 -
ROP menu