Iris (IRIS)
Displaying and setting the iris (IRIS)
Manual adjustment
When the auto iris is not on, the iris can be adjusted manually.
The iris value appears in the adjustment value display (A).
Adjustment is possible when “IRIS” is selected under [ROP SETTING] > [M.PED CONT] in the ROP menu.
“M.PED CONT” (see page 112)
A. Adjustment value display
B. [IRIS RELATIVE] button
C. IRIS lever
Operating procedure
1. Adjust the iris level with the IRIS lever (C).
Moving it forward adjusts the level in the CLOSE direction and moving it backward adjusts the level in the OPEN direction.
You can specify whether the variable range of the iris lever (C) is dependent on the [SENSE] and [COARSE] settings of
[IRIS RELATIVE] in the ROP menu.
When you press and hold the [IRIS RELATIVE] button (B), the [IRIS RELATIVE] menu appears and the [SENSE] and
[COARSE] settings can be configured.
When you press the [IRIS RELATIVE] button (B), the button lights and the iris lever will be dependent on the [SENSE]
and [COARSE] settings of [IRIS RELATIVE] in the ROP menu.
ヒチバチヒ
リンリヴチンユロモヵリヷユ
ンユロモヵリヷユ
ヰョョ
ヴユワヴユヤヰモンヴユ
ヒパビピペビベ
ユヹリヵ
ヤパ
ョヘチハチブ
Automatic adjustment
Adjust the iris automatically. (Auto iris)
- 41 -
Adjustment and settings
To Next Page
Loading...
