Panasonic AK-HRP1005G

02 SCENE
The setting values will vary depending on the connected camera.
ヒチバチピ
ヴヤユワユ
ヰョョヰョョヰョョ
ヰョョヰョョヰョョ
ヴヤユワユヒ
ドㄑㄖㄔㄉナ
ヴヤユワユビ
ドㄑㄖㄔㄉナ
ヴヤユワユピ
ドㄑㄖㄔㄉナ
ヴヤユワユブ
ドㄑㄖㄔㄉナ
ヴヤユワユプ
ドㄑㄖㄔㄉナ
ヴヤユワユフ
ドㄑㄖㄔㄉナ
ビチバチピ
ヴヤユワユ
ヴヤユワユヘ
ドㄑㄖㄔㄉナ
ヴヤユワユベ
ドㄑㄖㄔㄉナ
ユヹユヤヶヵユ
ヴヤユワユ
ヰョョヰョョ
ドㄑㄖㄔㄉナヒ
ヴヵヰンユ
ピチバチピ
ヴヤユワユ
ユヹヵヒ
ドㄑㄖㄔㄉナ
ユヹヵビ
ドㄑㄖㄔㄉナ
ワヰムワヰム
ャヶヵヵヰワ
ヴユロチヮヰュユ
ヮヰュユヒ
Item Setting details
SCENE1 Set the scene file to ON or OFF.
When a scene file is set to ON, the other scene files will be set to OFF.
If you reselect a scene file that is set to ON, it will be set to SCENE OFF.
SCENE2
SCENE3
SCENE4
SCENE5
SCENE6
SCENE7
SCENE8
STORE SCENE Displays the number of the scene file you want to save.
STORE EXECUTE Executes the scene file number displayed in [STORE SCENE].
EXT1 Applies the scene data loaded to “EXT1” with [SD CARD LOAD] to the camera and CCU.
When this is performed, the scene file will be set to OFF.
EXT2 Applies the scene data loaded to “EXT2” with [SD CARD LOAD] to the camera and CCU.
When this is performed, the scene file will be set to OFF.
BUTTON SEL MODE Interchanges the function performed when the [FILES] button on the panel is pressed.
MODE1 (default)
Short press: Recall a scene file
Long press: Display the menu
MODE2
Short press: Display the menu
Long press: Recall a scene file
- 64 -
ROP menu