Panasonic AK-HRP1005G

Front panel 3
1 2 3 4
5 6 7 8
1 [GAIN] button Use this button to display the white balance menu.
“09 RGB GAIN” (see page 71)
Status displays
Lit
green:
The current value matches that configured in the reference file.
Lit
red:
The current value does not match that configured in the reference file.
Off: Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
n Use the [REF.RECALL] button to load a reference file.
The reference file settings will be applied to the CCU settings.
n Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
2 [SHT] button Use this button to display the shutter menu.
“03 SHUTTER SPEED” (see page 65)
Status displays
Lit
green:
The current value matches that configured in the reference file.
Lit
red:
The current value does not match that configured in the reference file.
Off: Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
n Use the [REF.RECALL] button to load a reference file.
The reference file settings will be applied to the CCU settings.
n Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
- 24 -
Parts and their functions