Panasonic AK-HRP1005G

CC filter
Displaying and setting the CC filter
The CC filter adjustment value appears in the adjustment value display (A) when the CC filter is selected with the [DISP] button (C).
When the setting value is changed from the standard position set in the ROP menu, the [CC] indicator (B) is yellow lit. (The standard pos-
ition remains set while the indicator is green lit.)
“STD POSITION CC” (see page 113)
B
A
C
D
E
A. Adjustment value display
B. [CC] indicator
C. [DISP] button
D. [UP (FREE)], [DOWN (CHARA)] button
E. [SEL] dial
Operating procedure
1. Press the [DISP] button (C) to light the [CC] indicator (B).
The [ND], [CC], [GAIN], [PED], [SHT], and [SYNC] indicators light in sequence with each press of the button.
2. Adjust the setting value using the [UP (FREE)] or [DOWN (CHARA)] button (D).
The set value appears in the adjustment value display (A).
You can also perform adjustments with the [SEL] dial (E).
- 37 -
Adjustment and settings