Shutter (SHT)
Displaying and setting the shutter (SHT)
The shutter adjustment value appears in the adjustment value display (A) when the shutter is selected with the [DISP] button (C).
When the setting value is changed from the standard position set in the ROP menu, the [SHT] indicator (B) is orange lit. (The standard pos-
ition remains set while the indicator is green lit.)
The “SHUT” and “SYNC” shutter operation modes can be switched under [SHUTTER SPEED] > [SHUTTER MODE] in the ROP menu.
“SHUTTER MODE” (see page 65)
A. Adjustment value display
B. [SHT] indicator
C. [DISP] button
D. [UP (FREE)], [DOWN (CHARA)] button
E. [SEL] dial
Operating procedure
1. Press the [DISP] button (C) to light the [SHT] indicator (B).
The [ND], [CC], [GAIN], [PED], [SHT], and [SYNC] indicators light in sequence with each press of the button.
2. Adjust the setting value using the [UP (FREE)] or [DOWN (CHARA)] button (D).
The set value appears in the adjustment value display (A).
You can also perform adjustments with the [SEL] dial (E).
- 39 -
Adjustment and settings
To Next Page
Loading...
