Panasonic AK-HRP1005G

Item Setting details
SDR CNVRT MD Sets the SDR CONVER mode.
SHOOTING MODE Sets the shooting mode.
DNR LEVEL Sets the level for the noise reduction.
DNR SW Enables/disables the noise reduction function.
SDR CONVERT GAIN Sets the SDR gain.
SDR CONVERT CLIP Sets the SDR clip.
This is enabled when connected with a camera other than an AK-UC4000. (When con-
nected with an AK-UC4000, "-" is displayed.)
SDR CONVERT BLACK Adjusts the black level offset of the SDR video.
This is enabled when connected with an AK-UC4000. (When connected with a different
camera, "-" is displayed.)
SDR CONVERT POINT Sets the SDR point.
This is enabled when connected with an AK-UC4000. (When connected with a different
camera, "-" is displayed.)
SDR CONVERT SLOPE Sets the SDR slope.
This is enabled when connected with an AK-UC4000. (When connected with a different
camera, "-" is displayed.)
- 123 -
ROP menu