Item Setting details
V DETAIL FRQ Set the V DETAIL frequency.
CRISP Set the noise elimination level for the detail signals
LEVEL DEPENDENT Set the level of dark detail removal.
DARK DETAIL Set the level of dark detail enhancement.
DETAIL SOURCE Selects the source signals for creating the detail components.
DETAIL GAIN (+) Changes the detail gain level in the + (up) direction
DETAIL GAIN ( - ) Changes the detail gain level in the - (down) direction
DETAIL CLIP+ Adjusts detail clipping to minimize scintillation resulting from excessive detail application.
DETAIL CLIP- This limits the length of the undershoot portion of the detail edge component.
KNEE APERTURE Adjusts the knee aperture level.
DETAIL KNEE Adjusts the knee detail component.
DETAIL Enables or disables the HD detail effect.
LV DPN SW Removes dark details.
D. DTL SW Enhances dark details.
- 84 -
ROP menu
To Next Page
Loading...
