18
BB-HCM511A/BB-HCM531A
5 Location of Controls and Components
*
1
Understanding the Camera Indicator
The camera’s indicator lights as follows according to the status of the camera. Understanding how and when the indicator lights
can help you troubleshoot problems with the camera.
Camera Status or Operation Indicator Color and Pattern
Normal Operation Green
When power is turned on (camera is starting up)
Orange→Flashing orange
Obtaining IP address via DHCP Flashing green
LAN cable not connected or no LAN connection Orange
Automatic Setup In progress
Flashing green
Completed Green
Updating firmware Flashing orange
Factory reset (by software or by pressing the FACTORY DEFAULT
RESET button)
Flashing orange → Off → (The camera restarts)
UPnP
TM
port forwarding error
Flashing orange (2-second intervals)
Camera failure
Flashing red
To Next Page
Loading...
