What to do if my Panasonic Laptop cannot enter standby or hibernation?
If you are having trouble entering standby or hibernation mode on your Panasonic Laptop, try these steps: * Remove USB devices temporarily. If the problem continues, restart the computer. Allow 1 to 2 minutes for standby or hibernation. * If the computer is communicating via modem, wait approximately one minute before attempting to enter standby.
Why my Panasonic Laptop cannot enter standby or hibernation?
If your Panasonic Laptop is unable to enter standby or hibernation, try temporarily removing USB devices. If the issue continues, restart the computer. It may also take one or two minutes to enter standby or hibernation. Also, the computer may not enter standby when communicating via modem; wait approximately one minute.
Why won't my Panasonic Laptop automatically enter standby/hibernation mode?
If your Panasonic Laptop is not automatically entering standby or hibernation mode, consider these solutions: * If you are using a wireless LAN connection, select the profile and connect to the access point. * If you are not using wireless LAN, turn off the wireless LAN function. * Ensure that you are not using any software that regularly accesses the hard disk. * Close AMcap for TOUGHBOOK.
What to do if I forgot my Panasonic CF-19 password?
If you've forgotten your Panasonic Desktop password: * If you have a password reset disk, you can reset the administrator password. Insert the disk, enter any wrong password, and then follow the on-screen instructions to set a new password. * If you do not have a password reset disk, reinstall and set up Windows, and then set a new password.
What to do if my Panasonic CF-19 has no display?
If your Panasonic Desktop has no display, try the following: * The external display may be selected. Press Fn + F3 to switch the display. Wait until the display has been switched completely before pressing Fn + F3 again. * When using an external display, check the cable connection. * Turn on the display. * Check the settings of the external display. * The display may be turned off by the power-saving function. To resume, do not press the direct selection keys, but press any other key like Ctrl. * The computer may have entered sleep or hibernation by the power-saving function. To resume, slide the power switch. * The screen may not be displayed even after the computer resumed from sleep or hibernation. In this case, press Fn+ F7 to enter sleep and resume the computer again.
What to do if my Panasonic Desktop screen is disordered?
If the screen on your Panasonic Desktop is disordered, it may be due to changing the number of display colors and resolution. Restart the computer. Also, connecting/disconnecting an external display may affect the screen; in this case, restart the computer.
How to fix disordered screens during simultaneous display on Panasonic CF-19?
If one of the screens becomes disordered during simultaneous display on your Panasonic Desktop, when using the Extended Desktop, use the same display colors for the external display as those used by the LCD. If you continue to experience problems, try changing the display by right-clicking on the desktop and clicking [Graphics Properties] - [Display Devices]. Note that simultaneous display cannot be used until Windows startup is complete (during Setup Utility, etc.).
How to fix no sound on my Panasonic Laptop?
If there is no sound on your Panasonic Laptop, first, try pressing Fn+F4 or Fn+F6 to cancel mute. If this doesn't work, restart the computer.
What to do if my Panasonic Laptop cannot shut down or restart?
If your Panasonic Laptop is unable to shut down or restart, try removing any connected USB devices. Also, allow the system one or two minutes to complete the shutdown process.
What to do if my Panasonic Laptop cannot enter standby or hibernation automatically?
If your Panasonic Laptop is unable to automatically enter standby or hibernation, try disconnecting any peripheral devices.
General| RAM | Up to 4GB |
|---|---|
| Storage | Up to 320GB HDD or SSD |
| Display | XGA |
| Operating System | Windows 7 |
| Ports | USB, VGA, Serial, Ethernet, Headphone/Mic, SD Card Slot |
| Wireless Connectivity | Wi-Fi, Bluetooth |
| Durability | MIL-STD-810G certified |
To Next Page
