73
Disabling/Enabling Wireless Communication
<Only for model with wireless LAN, Bluetooth and/or wireless WAN>
There are 4 ways of disabling and enabling wireless communication.
The wireless switch on the left side of the computer (below)
Wireless Switch Utility ( page 75)
Settings in the [Advanced] menu of the Setup Utility ( page 90)
Setting in the Wireless Connection Disable Utility ( page 76)
NOTE
For further information about wireless LAN: ( page 78)
For further information about Bluetooth: ( page 82)
For further information about wireless WAN: Refer to the instruction manual of the wireless device.
The wireless communication is also enabled or disabled by connecting or disconnecting the LAN cable. ( page 75)
To disable all wireless communication
1 Open the cover.
A Slide the latch (A) to the right to unlock the cover.
B Slide the latch (A) down, and open the cover.
2 Slide the wireless switch (B) to OFF.
The Wireless Switch
To Next Page
Loading...
