Panasonic CF-19 series - PC Card; Expresscard (Only for Model with Expresscard Slot); Smart Card (Only for Model with Smart Card Slot)

112
Troubleshooting (Advanced)
 PC Card / ExpressCard (only for model with ExpressCard slot)
A card does not work.  Insert the card correctly.
 The card does not conform to the card standard.
 Restart the computer after installing a driver (of card or other device).
 Set [PC Card Slot] and [ExpressCard Slot] to [Enabled] in the [Advanced] menu
of the Setup Utility ( page 90).
 The port settings are not correct.
 Read the instruction manual of the card or contact the manufacturer of the card.
 Remove the card and insert it again ( page 32).
 The driver is not compatible with the operating system.
 SD Memory Card
Cannot use an SD Memory Card.  Set [SD Slot] to [Enabled] in the [Advanced] menu of the Setup Utility ( page
90).
 Smart Card (only for model with Smart Card slot)
Cannot use a Smart Card.  Insert the Smart Card correctly.

Set [Smart Card] to [Enabled] in the [Advanced] menu of the Setup Utility ( page 90).
 To use a Smart Card, you need a specified software and driver.