84
Hard Disk Drive
To ins e rt
A Insert the hard disk drive until it surely fits in the slot.
B Close the cover until it clicks, and slide the latch (C) to the left to lock the cover.
4 Insert the battery pack ( page 29).
CAUTION
Confirm that the latch is surely locked so that it does not fall when you carry the computer.
NOTE
You can erase the data before changing the hard disk drive. ( page 101)
You can check that the hard disk is recognized or not in the [Information] menu of the Setup Utility ( page 86). If the
hard disk is not recognized, turn off the computer and insert it again.
To Next Page
Loading...
