39
RAM Module
Use RAM modules that comply with the specifications below. Using any other module may cause malfunction or result in
computer failure.
RAM module specifications:
200 pins, SO-DIMM, 1.8 V, DDR2 SDRAM, PC2-5300
(For information of RAM module compatibility, contact Panasonic Technical Support.)
CAUTION
RAM modules are extremely sensitive to static electricity and can be affected even by static electricity from the human
body. When inserting and removing RAM modules, do not touch the terminals or internal components, and do not
allow foreign particles to enter the slots. Doing so may cause damage, fire, or electric shock.
1 Turn off the computer.
Do not use standby or hibernation.
2 Disconnect the AC adaptor and remove the battery pack ( page 29).
3 Remove the screws (A) and the cover (B) on the bottom of the
computer.
Inserting/Removing the RAM Module
To Next Page
Loading...
