23
(EN)
ECONAVI Function
Using the remote controller, you can switch the ECONAVI function ON/OFF.
1
Press [ECONAVI] to ON the
ECONAVI function.
* When ECONAVI is enabled,
will appear.
A
1 / 2
2
Press [ECONAVI] to OFF.
* When the indoor unit is stopped,
will disappear.
ON/OFF setting of ECONAVI function
Note
Turn the ECONAVI function OFF if:
- You want to maintain the room temperature at a set temperature.
- You want to keep air conditioner running while nobody is in a room.
- The sensor fails.
- Only infants, babies, or people only with disabilities are in the room.
WARNING
Do not use the ECONAVI function in a room with disabled persons or infants only.
Due to their limited motions, the ECONAVI sensor may judge no person is present,
causing the indoor unit to stop the operation.
To Next Page
Loading...
