Why won't my Panasonic Universal Remote stop running?
If you cannot stop the operation of your Panasonic Universal Remote, or it starts automatically even after pressing the Start/Stop (Off) button, the issue may be a faulty sensor or incorrect installation. Turn OFF the ECONAVI function using the remote controller and then contact the retailer or point of purchase, providing them with the Model No. and details of the problem.
What to do if Panasonic Universal Remote screen is flashing?
If the screen of your Panasonic Universal Remote is flashing, it could mean several things: the indoor unit has stopped (turn it on); the unit is in Fan mode (ECONAVI doesn't work in this mode); or the ECONAVI function is off (turn it on with the remote). Also, the indoor unit might not support the ECONAVI function; contact your dealer if turning ECONAVI on makes no difference.
How to fix Panasonic Universal Remote if it doesn't start?
If your Panasonic Universal Remote does not start when you press the Start/Stop button, try the following: if it's after a blackout, press Start/Stop again. If that doesn't work, turn the unit on and press Start/Stop again. Finally, if a light was blinking and has stopped, press Start/Stop again.
General| Brand | Panasonic |
|---|---|
| Model | CZ-RTC4 |
| Category | Remote Control |
| Language | English |
To Next Page
