Optional Controller
Manual of Controller
2 - 10
1. Timer Remote Controller (CZ-RTC4)
17
(EN)
Outing Function
Outing function is a function that prevents the room temperature from
increasing too much (or decreasing too much) when no one is in the room.
An air conditioner works automatically if this function is set effective.
•
•
•
•
•
A remote controller may lose outing function operation information when it is cut for
more than 24 hours during the outing function operation by electricity. It reverts from
the blackout, and an air conditioner does not drive in outing function when operation
is started. At this time, an air conditioner does not stop at outing function.
16
(EN)
Before Asking Repair Work
Before asking repair work, please check the following.
Trouble Possible Cause/Remedy
“ERROR” is displayed
when the minute digits are
entered.
If there is another TIMER No. which has the program of the same
time and same day, you cannot overlap the setting.
The set data is not stored.
The stored programs are automatically sorted by the time. Check if
the data is stored in the other TIMER No.
Program does not
function.
Check if the time indication is not “– – : – –”.
When the time is invalid, the program is also invalid.
Check the remote controller prohibition inside.
In that case, the program is invalid.
Weekly Program Function
SM830241-00_2WAY SYS.indb 10 2015/03/26 14:54:54
To Next Page
Loading...
Need help?
General
