Optional Controller
Manual of Controller
2 - 3
1. Timer Remote Controller (CZ-RTC4)
3
(EN)
Safety Precautions
CAUTIONS
This appliance is intended to be used by expert or
trained users in shops, in light industry and on farms, or
for commercial use by lay persons.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
WARNING
Do not use this appliance in a potentially explosive
atmosphere.
• Do not operate with wet hands.
• Do not wash with water.
In case of malfunction of this appliance, do not repair by
yourself. Contact the sales or service dealer for repair.
In case of emergency, remove the power plug
from the socket or switch off the circuit breaker
or the means by which the system is isolated
from the mains power.
WARNING
CAUTION
This symbol refers to a hazard or unsafe
practice which can result in severe personal
injury or death.
This symbol refers to a hazard or unsafe
practice which can result in personal injury or
product or property damage.
Matters to be observed Prohibited matters
2
(EN)
Preparations How to Use Setting Change
When
Necessary
Page
Thank you for purchasing the
Panasonic timer remote controller.
Read the Operating Instructions
carefully for safe use. This
manual describes the Operating
Instructions of the timer remote
controller. Read this manual as
well as operating instructions
supplied with indoor units and
outdoor units.
Be sure to read the “Safety
Precautions” (P.3, 4) before
using.
Keep this manual with operating
instructions supplied with indoor
units and outdoor units in a safe
place.
Be sure to keep this manual in a
place easily accessible by users.
In the case of user change, be
sure to give this manual to the
new user.
NOTICE
The English text is the original
instructions. Other languages
are translation of the original
instructions.
CONTENTS
Safety Precautions ............................... 3
Part Names ..........................................5
• Control panel .......................................5
• Screen display .....................................6
Basic Operations..................................7
• How to Operate ....................................7
• Setting the Present Time .....................9
Weekly Program Function .................10
• Checking the Weekly Timer ...............10
• Changing the Program Timer ............. 11
• Deleting the Program Timer ...............13
• Invalidating the Program Timer ..........14
• Duplicating the Program Timer ..........15
• Before Asking Repare work ...............16
Outing Function .................................17
• Setting the Outing Function ...............18
Sleeping Function ..............................19
ECONAVI Function ............................. 22
•
ON/OFF setting of ECONAVI function
...23
Troubleshooting .................................24
Speci cations ..................................... 26
SM830241-00_2WAY SYS.indb 3 2015/03/26 14:54:51