Optional Controller
Manual of Controller
2 - 11
1. Timer Remote Controller (CZ-RTC4)
19
(EN)
This function leads you to a comfortable sleep and changes the room temperature
during your sleep.
• You can set the off timer every one hour from 1 to 10 hours.
Display of remote control unit (during the time setting)
Sleeping function
indication
Off time
In case the present time is 23:00.
Operating time
Display of remote control unit (during sleeping function setting)
°
Sleeping function
indication
* If no operation is made for 3 minutes, the time setting mode will be automatically
nished.
Sleeping Function
18
(EN)
1
Press and hold [Ventilation] for more
than 2 seconds to display
the upper limit temperature setting
screen.
[SETTING], , and the upper limit
temperature start fl ashing.
(The default value of the upper limit
temperature is 38 °C.)
A
1 2 / 32 / 3
°
2
°
3
2
Press [ / ] to select the upper
limit temperature, and press [SET]
to x the value. The lower limit
temperature setting screen is
displayed.
3
Press [ / ] to select the lower limit
temperature, and press [SET] to
x the value. The outing function
setting is completed.
(The default value of the lower limit
temperature is 10 °C.)
* The unit returns to the normal mode if [CANCEL] is pressed or there is no operation
made for 3 minutes during the setting. In this case, all the settings in progress will be
lost.
Canceling the outing function
1. Press and hold [Ventilation] for more
than 2 seconds while the outing
function is set.
A
1
Outing Function
Setting the Outing Function
SM830241-00_2WAY SYS.indb 11 2015/03/26 14:54:55
To Next Page
Loading...
