34
(EN)
Initial Settings
The room to which the remote controller belongs can
be easily identifi ed.
1
Display the menu screen.
To return to the previous screen
Press .
To return to the top screen
Press 2 times.
2
Select [Initial settings].
▲ ▼ →
3
Select [Controller name].
▲ ▼ →
4
Enter the name. (Repeat the same
procedure for all characters.)
▲ ▼ → ◄ ► →
• Up to 16 characters.
(Space is included in the number of
characters.)
To change the character type
Select the character type with ▲ ▼
◄ ► and press
.
Character
type
To enter space
Select [Space] with ▲ ▼ ◄ ► and
press
.
To delete 1 character
Select [BS] with ▲ ▼ ◄ ► and
press
.
5
Select [Conf].
▲ ▼ ◄ ► →
→
(Press 2 times to
fi nish.)
Controller name
To Next Page
Loading...
