40
(EN)
Setting information icon list
Icon Description Page
[Lock indiv. fl ap] is set. P.13
Switching between Heat and Cool/Dry mode is prohibited (Switching to Auto
mode is also prohibited.).
–
Remote control operation is restricted by a central control device. –
The indoor unit fi lter needs to be cleaned. P.20
The engine oil needs to be replaced (only when the gas heat pump air
conditioner is used).
–
[ON/OFF timer] is set. P.14
[Weekly timer] is set. P.15
Energy saving operation is in process. P.8
The operation capacity of the outdoor unit is restricted. –
[Schedule peak cut] is set. P.28
[Temp auto return] is set. P.24
[Temp range] is set. P.25
[Auto shutoff] is set. P.26
[Repeat off timer] is set. P.30
[Quiet operation] is set. P.22
The temperature sensor of the remote controller is detecting the room
temperature.
P.37
[Operation lock] is set. P.33
Fresh air is used for ventilation.
(Only when connecting a heat exchange ventilation unit or connecting a
commercially sold fan)
P.38
[Outing function] is set. P.31
To Next Page
Loading...
