22
RQT8858
Recording television programmes
See also “Important notes for recording” (➡ 7).
Depending on the type of disc used for recording or the type of
broadcast, there may be restrictions on the title you are trying to record.
≥[RAM] It is not possible to record continuously from one side of a
double sided disc to the other. You will need to eject the disc and
turn it over.
≥[+RW] You can create Top Menu using “Create Top Menu” (➡ 60).
Recording or editing on the disc may delete the menu. In that case,
create the menu again.
≥When recording a digital radio broadcast or a digital broadcast that
is not being received correctly, the digital channel information
(➡ 21) is also recorded.
[RAM] [-RW‹V›] [+R] [+R]DL] [+RW]
≥To use a new disc, formatting is necessary.
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥Turn on this unit.
1 Press [DRIVE SELECT] to select the
DVD or VHS drive.
The DVD or VHS indicator lights up on the unit’s display.
2 Insert a disc. (➡ 12)
≥If the “Format” screen appears (➡ 24, When the format
confirmation screen is displayed).
≥When using a DVD-RAM for the first time with this unit,
format it to ensure accurate recording (➡ 59)
or
Insert a video cassette. (➡ 12)
3 Press [WXCH] to select the channel.
Channels are displayed in the order of digital channels first,
and then followed by analogue channels.
≥Digital channel
You can also select the channel with the numbered buttons.
≥Analogue channel
You can also select the channel with the following steps.
1 Press [ANALOGUE CH].
2 Press the numbered buttons to select the channel.
4 Press [REC MODE] to select the
recording mode.
[DVD]
XP#SP#LP#EP
^-------------------------}
[VHS]
SP#LP#EP
^----------------}
≥To record sound using LPCM (XP mode only):
Set the “Audio Mode for XP Recording” to “LPCM” in the
Setup menu (➡ 64).
5 Press [¥ REC] to start recording.
Recording will take place on open space on disc. Data will not
be overwritten.
≥You cannot change the channel or recording mode during
recording.
≥You can record while the unit is in standby for timer
recording. However, once the time for the timer recording to
begin is reached, any recording taking place will stop and
the timer recording will begin.
≥[RAM] [VHS] (Analogue broadcast only) You can change the
audio being received by pressing [AUDIO] during recording.
(Does not affect the recording of audio.)
∫ To pause recording
Press [;].
Press again to restart recording.
You can also press [¥ REC] to restart.
(Title is not split into separate titles.)
∫ To stop recording
Press [∫].
≥From the start to the end of the recording is called one title.
≥[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] It takes about 30 seconds for
the unit to complete recording management information after
recording finishes.
In order to play DVD-R, DVD-R DL, DVD-RW (DVD-Video format),
+R and +R DL (recorded with this unit) on other DVD players, it
is necessary to finalise them (➡ 59).
[Note]
[VHS]
≥Even if the video cassette is labelled “S-VHS”, it is not
possible to record in the S-VHS system with this unit.
This unit records in the normal VHS system.
≥When recording is paused for 5 minutes or more, the unit returns to
stop.
e.g., 5: [0] ➡ [0] ➡ [5]
15: [0] ➡ [1] ➡ [5]
115: [1] ➡ [1] ➡ [5]
STATUS
REC MODE
REC
MANUAL SKIP
CREATE
CHAPTER
F
U
N
C
T
I
O
N
M
E
N
U
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
G
U
I
D
E
RETURN
PAU SE
STOP
SLOW/SEARCH
CH
SELECT
INPUT
0
9
8
7
6
54
3
2
1
CH
AV
¦
TV
DRIVE
SELECT
¦
VOL
DELETE
EXIT
OK
OPTION
ANALOGUE
CH
G-Code
AUDIO
DISPLAY
TIME SLIP
PROG/CHECK
REW
FF
JET REW
3
4
5
AUDIO
1
w
ANALOGUE
CH
Numbered
buttons
S VIDEO
IN 2
VIDEO
/MONO
AUDIO
R
L
S VIDEO
VIDEO
/MONO
AUDIO
R
L
AV2 I N
DRIVE SELECT
REC
CH
OPEN/CLOSE
EJECT
COPYING
22
∫
531
RECREC
e.g., 5: [0] ➡ [5]
15: [1] ➡ [5]
Quick Start (➡ 66)
1 Sec. Quick Start for Recording & EPG Display
(When connecting to TV using COMPONENT VIDEO, VIDEO or S
VIDEO terminals)
From the power on, recording on DVD-RAM starts in about 1
second after the REC button is pressed. If the GUIDE button is
pressed while the unit is off, the Electronic Program Guide (EPG)
displays in less than 1 second. (Quick Start Mode)
≥“Quick Start” is set to “On” at the time of purchase.
≥Depending on the type of TV or the connected terminal, it may
take time to display the screen.
[Note]
Startup takes up to a minute when:
–You play a disc or start recording to discs other than DVD-RAM.
–You want to make other operations.
–The clock has not been set.
RECREC
RECREC
Recording mode
(➡ 23)
Remaining time
REC
Elapsed recording time
EZ47VGN.book 22 ページ ２００７年６月１８日 月曜日 午後２時１２分
To Next Page
Loading...
