Panasonic DMR-EZ47V

31
RQT8858
≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
∫ To change a programme
Press [3, 4] to select the programme and press [OK]. (➡ 29,
step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [DELETE ¢].
You can also delete a programme with the following steps
1 Press [3, 4] to select the programme and press [OPTION].
2 Press [3, 4] to select “Delete” and press [OK].
∫ To exit the timer recording list
Press [PROG/CHECK].
Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
Check, change or delete a programme
Timer
Recording
Remain
12:56:00 15. 7. TUE
RETURN
OK
Press OK to store new programme.
Mode
StopStart No. Date
Drive
Name
Drive
space
New Timer Programme
1:58 SP
DVD
--:----
VHS
Icons
F Timer recording standby is activated.
[ This programme is currently recording.
W The times overlap those in another programme.
Recording of the programme with the later start time
starts when the earlier programme finishes recording.
You stopped a weekly or daily timer recording. The
icon disappears the next time the timer programme
starts recording.
F The disc was full so the programme failed to record.
The programme was copy-protected so it was not
recorded. [DVD]
X The programme did not complete recording because
the disc or video cassette is dirty or some other
reason.
Drive: Recording drive is set to DVD or VHS.
l
Message displayed in the “Drive space” line
OK: Displayed if the recording can fit in the remaining
space. [DVD]
> (Date): For recordings made daily or weekly, the display
will show until when recordings can be made (up
to a maximum of one month from the present
time) based on the time remaining on the disc.
! : It may not be possible to record because:
≥The disc is write-protected. [DVD]
≥There is no more space left. [DVD]
≥
The number of possible titles has reached its
maximum.
[DVD]
≥The new timer recording will completely or
partially record over this timer recording.
The timer recording was not performed or
completed for the following reasons:
≥A disc or a video cassette was not inserted.
≥A protected disc or a video cassette without a
secure accidental erasure prevention tab was
inserted.
≥The remaining recording time on the video
cassette was insufficient. [VHS]
– – : All other recordable cases. [VHS]
Timer recording
EZ47VGN.book 31 ページ ２００７年６月１８日 月曜日 午後２時１２分