Panasonic DMR-EZ47V

7
RQT8858
Important notes for recording
≥It is not possible to record to both DVD and VHS drive simultaneously.
Selecting Audio
for Recording
Broadcast in multi-channel sound (Digital broadcast
only):
You can select the audio language when receiving audio in
multi channel broadcast [“Multi Audio” appears at the
bottom of digital channel information display (➡ 21)].
However, audio cannot be switched after recording.
Bilingual broadcasts (Analogue broadcast only):
[RAM] [VHS]
Both main and secondary audio can be recorded.
You can change the audio during playback.
(➡ 34, Changing audio during play)
However in the following cases, select whether to record
the main or secondary audio:
–Recording sound in LPCM (➡ 64, Audio Mode for XP
Recording)
If you record from external
equipment
–Select both “M 1” and “M 2” on the
external equipment.
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Select the main or secondary audio before recording
(➡ 64, Bilingual Audio Selection)
If you record from external equipment
–Select “M 1” or “M 2” on the external equipment.
About the aspect
when recording a
programme
[RAM] [-R] [-R]DL] [-RW‹V›]
≥If “Aspect for Recording” in the Setup menu is set to
“Automatic” (The default setting is “Automatic” ➡ 63), the
programme will be recorded in the original aspect used
when recording started (including when recording started
at a commercial, etc.). If recorded with a different aspect,
select the correct aspect (“16:9” or “4:3”).
However, in the following case, programme will be
recorded in 4:3.
[-R] [-R]DL] [-RW‹V›]
Programme recorded using “EP” or “FR (recordings 5 hours
or longer)” recording modes will be recorded in 4:3 aspect.
[VHS]
The original aspect used for the source programme will
also be used with the recording.
[+R] [+R]DL] [+RW]
When recording
the “One time only
recording”
broadcasts
It is not possible to record the broadcasts that allow “One time only recording” onto DVD-R, DVD-R DL, DVD-RW, +R,
+R DL, +RW or 8 cm DVD-RAM discs. Use the CPRM (➡ 80) compatible DVD-RAM.
≥Even when copying to videotape the title may not be copied correctly because of the copy guard.
Playing the disc
on other DVD
players
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
The disc must be finalised after recording or copying (➡ 59).
It is necessary to finalise DVD-R, etc. on this unit after recording or copying titles to them. You can then play them as a
commercially sold DVD-Video. However, the discs become play-only and you can no longer record or copy.
§
§
You can record and copy again if you format DVD-RW.
Recording to DVD-
R DL and +R DL
DVD-R DL and +R DL discs have two layers of recording surface on one side.
≥It is not possible to record continuously from the first layer to the second layer. Recording stops when space
on the first layer becomes full. You must close the first layer to start recording on the second layer (➡ 60).
Closing makes the first layer unavailable for recording (editing is still available). You cannot cancel closing. Make
certain before proceeding.
Hello
Select the audio that you
want to record in “DVB
Multi Audio” in the on-
screen menu (➡ 43).
Hola Hallo
M1
M2
Hallo
Hello
M1
Hello
The selected
audio only is
recorded.
Recorded in 4:3 aspect
`
[RAM] CPRM compatible discs only.
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
(≤: Can do, –: Cannot do)
C
H
G
S
E
A
R
C
H
E
N
T
E
R
O
F
F
M
E
N
U
R
E
T
U
R
N
T
O
P
M
E
N
U
D
I
S
P
L
A
Y
V
O
L
O
N
A
.
S
U
R
R
O
UN
D
M
O
N
I
T
O
R
M
O
D
E
P
I
C
T
U
R
E
M
O
D
E
R
E
P
E
A
T
O
P
E
N
D
C
I
N
9
V
Í /I Í CD SEQUENTIAL
DISC
DOUBLE RE-MASTER ;∫ 1 :/65/9 DISC EXCHANGE DISC SKIP < OPEN/CLOSE
1 2 3 4 5
Play on other DVD equipment
Record to DVD-R, etc.
Finalise
It is not possible to
record continuously
from the first layer to
the second layer.
(Disc inner
side)
(Disc outer
side)
The available
space
Title 1 Title 2
Recording/Playback direction
The second layer
The first layer
DVD-R DL
+R DL
Disc information/Important notes for recording
EZ47VGN.book 7 ページ ２００７年６月１８日 月曜日 午後２時１２分