26
Chapter 2 General Settings
Changing the Maximum Prints
1
Select “Maximum Prints”.
2
Select the department number to
change the departmental limit of, and
then select “Input”.
3
Select the count limit you want to
change.
4
Select “Input”, and enter a new limit
(up to 7 digits) with the Keypad, and
then select “OK”.
z If you enter “9999999”, the copy count limit
becomes infinite.
z If the set limit is exceeded, the machine
stops automatically.
5
Select “Close”.
6
Select “OK”.
7
Select “Close”.
z Press the Reset key to return the machine
to the initial screen of the current active
mode.
To Next Page
Loading...
