72
Chapter 4 Fax/Email Settings
Example : Password-Transmit / Password-Receive
Password-Transmit : Sends the original only when the recipient password matches the sender’s
password.
Password-Receive : Receives the document only when the sender’s password matches the recipient
password.
For setting the Password-Transmit / Password-Receive function, set “43 Password-Transmit” or “44
Password-Receive” to “On” by following the procedure below.
z For password-transmit, refer to Password Communication in the Operating Instructions (For Facsimile and
Internet Fax) of provided CD-ROM.
z For password-receive, refer to Convenient Reception Features in the Operating Instructions (For Facsimile
and Internet Fax) of provided CD-ROM.
1
Press the Function key.
2
Select “Fax/Email Settings”.
3
Select “04 Key Operator Mode”.
4
Enter the password (8-digit), and then
select “OK”.
5
Select “01 Fax Parameters”.
To Next Page
Loading...
