88
Chapter 6 Printer Settings
Key Operator Mode
No. Parameter Comments Selective Item Standard
Setting
0 - 14 00 Print Printer Settings Print the Printer Settings list.
To cancel printing the parameter
setting list, press “
Stop
” and
“
OK
”.
While processing the
cancellation, panel operation is
denied, and an error beep is
produced.
The feeding paper(s) will be
ejected before completing the
above cancellation operation.
If setting a parameter, an
asterisk mark (*) will be added
before the parameter number.
Stop, Start Start
01 Job Completion Time Set the time-out period if the
machine does not receive a print
signal from the computer for a
specified time.
Select “Input”, and then enter
the job completion time.
1 to 999 (Sec) 180 (Sec)
02 Page Protection Set value to “On” to use page
protection.
Off, On Off
03 Error Page Print Set value to “On” to print the
data of an error job.
Off, On On
04 Spool Function Set value to “On” to set the
spool function.
Off, On On
05 Text Print Set value to “On” to print a text
with no pictures.
Off, On On
07 Font List Print (PCL) Print the PCL font list. Stop, Start Stop
08 Font List Print (PS) Print the PS font list.
z When the optional Printer
Controller Module (for Adobe
PostScript 3) is installed.
Stop, Start Stop
09 Mailbox Data Holding Set the limit of storing the data in
the mailbox. When “Infinity” is
set, data is not deleted.
Infinity, 1 day, 2 days,
3 days, 4 days, 5
days, 6 days, 7 days
7 days
10 Delete Mailbox Data Select the mailbox data to be
deleted.
•All
All data is deleted from the
mailbox.
•Before
Deletes the data which is
received before the specified
date.
All, Before Before
To Next Page
Loading...
