Panasonic DP-C265 - Example: Initial Sending Station (LAN Relay); LAN RLY XMT Request (Fax Parameter 140)

76
Chapter 4 Fax/Email Settings
Example : Initial Sending Station (LAN Relay)
The following setting is required for selecting whether the machine performs the LAN Relay XMT
Request.
Set the above item according to the descriptions.
z For more details about Initial Sending Station (LAN Relay), refer to Using the Relay Feature in the Operating
Instructions (For Facsimile and Internet Fax) of provided CD-ROM.
LAN RLY XMT Request (Fax Parameter 140)
Set the LAN Relay Transmission Request function.
1 Press the Function key.
2 Select “Fax/Email Settings”.
3 Select “04 Key Operator Mode”.
4 Enter the password (8-digit), and then
select “OK”.
5 Select “01 Fax Parameters”.
Enabling the LAN relay request function Fax Parameter 140: LAN RLY XMT Request