64
Chapter 4 Fax/Email Settings
Example : LDAP Server
To search an Email address or a fax number on LDAP server, the following user parameter settings are
required.
Set the above items according to the descriptions below.
z For details about LDAP search, refer to Searching for a Destination in the Operating Instructions (For
Facsimile and Internet Fax) of provided CD-ROM.
z LDAP can be set up in one sequence of procedure at “04 Network Settings” of Key Operator Mode in the
General Settings (see page 12).
z This feature is available in certain countries only.
LDAP Server Name (User Parameter 15)
This setting is required only when “29 DNS Server Address” in the General Settings is set to “Yes”.
When the setting is “No”, set “16 LDAP Server IP” (see page 66).
1
Press the Function key.
2
Select “Fax/Email Settings”.
3
Select “04 Key Operator Mode”.
4
Enter the password (8-digit), and then
select “OK”.
5
Select “00 User Parameters”.
LDAP Server Name User Parameter 15: LDAP Server Name
LDAP Server IP User Parameter 16: LDAP Server IP
LDAP User Name User Parameter 17: LDAP User Name
LDAP Password User Parameter 18: LDAP Password
LDAP Search Base User Parameter 19: LDAP Search Base
To Next Page
Loading...
