80
Chapter 4 Fax/Email Settings
Relay XMT Password (User Parameter 36)
Enter a Relay XMT Password (up to 10 characters) to be used for protection against unauthorized
(outside) stations from accessing your machine to relay messages to a G3 fax machine via PSTN. This
password should be given out to authorized personnel only.
1
Select “00 User Parameters”.
2
Select “30-39”, and then select .
3
Select “36 Relay XMT Password”.
4
Enter the Password (up to 10
characters), and then select “OK”.
z Advance to Manager’s Email Addr (User
Parameter 37) (see page 81), and set the
manager’s Email address.
To Next Page
Loading...
