43
Chapter 4 Fax/Email Settings
z For User Parameter settings, refer to Facsimile Settings (Option) in the Operating Instructions (For Setting
Up) of provided booklet.
z Network configuration should be set up by the system administrator.
User Parameters
No. Parameter Comments Selective
Item
Standard
Setting
0 - 9 00 Print UserParameterList Print the User Parameter List. Stop, Start Start
01 Logo Set the Logo.
Ex: Panasonic
Up to 25
characters
02 Character ID Set the Character ID.
Ex: HEAD OFFICE
Up to 16
characters
03 ID No. Set the numeric ID.
Ex: 555 1212
Up to 20
digits
04 Time Zone
Move the cursor by selecting “ ” or “ ”,
and then enter the time difference (from
GMT). Press the key to shift the signs
between minus (-) and plus (+).
GMT
+00:00
05 Email Address Set the Email address of the machine. Up to 60
characters
06 SMTP Server Name When “29 DNS Server Address” in the
General Settings is set to “Yes”, set the
SMTP Server Name.
Up to 60
characters
07 SMTP Server IP When “29 DNS Server Address” in the
General Settings is set to “No”, set the
SMTP IP Address.
3 digits x 4
08 SMTP AUTH Name When “170 SMTP Authentication” in the
Fax Parameters is set to “Valid”, set the
name of SMTP authentication.
Up to 40
characters
09 SMTP AUTH Password When “170 SMTP Authentication” in the
Fax Parameters is set to “Valid”, set the
password for SMTP authentication.
Up to 10
characters
10 - 19 10 POP Server Name When “29 DNS Server Address” in the
General Settings is set to “Yes”, set the POP
Server Name.
Up to 60
characters
11 POP Server IP When “29 DNS Server Address” in the
General Settings is set to “No”, set the POP
Server IP Address.
3 digits x 4
12 POP User Name Set the POP User Name. Up to 40
characters
13 POP Password Set the POP Password. Up to 10
characters
Continued on the next page...
To Next Page
Loading...
