Panasonic DP-C265

44
Chapter 4 Fax/Email Settings
10 - 19 15 LDAP Server Name When “29 DNS Server Address” in the
General Settings is set to “Yes”, set the
LDAP Server Name.
The default port number is changed by
setting SSL.
z Refer to Example : LDAP Server (see
page 64).
Up to 60
characters
“SSL”
Off: 389
On: 636
16 LDAP Server IP When “29 DNS Server Address” in the
General Settings is set to “No”, set the LDAP
Server IP Address.
The default port number is changed by
setting SSL.
z Refer to Example : LDAP Server (see
page 64).
3 digits x 4
“SSL”
Off: 389
On: 636
17 LDAP User Name Set the LDAP User Name.
z Refer to Example : LDAP Server (see
page 64).
Up to 40
characters
18 LDAP Password Set the LDAP Password.
z Refer to Example : LDAP Server (see
page 64).
Up to 10
characters
19 LDAP Search Base Set the LDAP database to search.
z Refer to Example : LDAP Server (see
page 64).
Up to 60
characters
20 - 29 21 Default Subject Set the information added to the subject line
for all outgoing Emails.
Up to 40
characters
22 Default Domain Set the domain name added to frequently
used or incomplete outgoing Email
addresses.
Ex: panasonic.com
Up to 50
characters
25 Selectable Domain (01) Set domain names to display on the domain
list. Up to 10 domain names can be set.
After entering the part of the Email address
preceding at mark “@”, select the desired
domain name.
Up to 30
characters
26 Selectable Domain (02)
27 Selectable Domain (03)
28 Selectable Domain (04)
29 Selectable Domain (05)
30 - 39 30 Selectable Domain (06)
31 Selectable Domain (07)
32 Selectable Domain (08)
33 Selectable Domain (09)
34 Selectable Domain (10)
User Parameters
No. Parameter Comments Selective
Item
Standard
Setting